Do not touch the metal leads on the new board-static discharge could blow your new board before it ever has a chance to breathe new life into your drive. You can ground yourself by either wearing an anti-static wrist band or by touching something grounded and metal. Reconnect the drive to the computer, then power back up.Slide in the new board, making sure it's seated firmly into the drive, then re-attach the screws.The inside of your plugged-in computer will usually work. If it works, congratulations! It's a good idea to back up your data at this point, but you're ready to go. Pre-heat a domestic oven at its lowest setting for five minutes or so, then turn it off. Place the drive in the oven for 2-5 mins, until it's warmed up. Remove the drive and repeat the first step.Please note that warming it up - whether it has already crashed or not - can and will make it die. If you still can't hear any noises, go on to the next step. However, if there is a difference, reattach the drive to your computer and listen for spin-up of the drive and normal clicking that indicates head activity. If needed, reheat the device and, while holding the drive in one hand, sharply spin and hit the drive on a hard surface.If all seems well so far, try to access the drive, and move your data onto a good drive. This is drastic of course but may help free the heads from any binding. Wd external hard drive mac led frozen Pc#.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |